Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister. Opret bruger Login
Add one internal and one external SuperSpeed USB 3.0 to your PC. The PEXUSB3S11 PCI Express USB 3.0 Card lets you add one internal, and one external USB 3.0 port to your PC through a PCI Express slot.
Featuring a native NEC PCI Express host controller chipset, the new USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility with older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. The inclusion of an internal USB 3.0 connection provides the added benefit of compatibility with USB 3.0-based internal storage solutions or front-bay hubs.
Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers.
For bus-powered USB devices, this PCIe USB 3.0 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 devices (500mA for USB 2.0).
UASP is supported in Windows 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.
Test results were obtained using an Intel Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.
Tuotekuvaus
StarTech.com 2 port PCI Express SuperSpeed USB 3.0 Card with UASP Support - 1 Internal 1 External - Dual Port PCIe USB 3.0 Adapter (PEXUSB3S11) - USB-sovitin - PCIe 2.0 - 2 porttia
Laitteen tyyppi
USB-sovitin
Koko tai muoto
Vaihtokortti - matala profiili
Liitäntä(väylän) tyyppi
PCI Express 2.0
Ulkomitat (PxSxK)
7.6 cm x 12.1 cm x 1.9 cm
Paino
40 g
Porttien lukumäärä
2 porttia
Tiedonsiirtoprotokolla
USB, USB 2.0, USB 3.0
Tiedonsiirtonopeus
5 Gbit/s
Yhteensopivuusstandardit
USB 1.1, USB 2.0, USB 3.0
Järjestelmävaatimukset
Microsoft Windows XP, Microsoft Windows Server 2003, Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows Server 2008 R2
Valmistajan takuu
Rajoitettu elinaikainen takuu
Suunniteltu malleihin
StarTech.com 4-Port Industrial USB 3.0 5Gbps Hub, Rugged USB Hub w/15kV Air/8kV Contact ESD and Surge Protection, DIN/Wall/Desk Mountable USB-A Hub, USB Expansion Hub with Locking Ports - Metal Construction (5G4AINDNP-USB-A-HUB)
Nettverkstilknytning
Yhteensopivat korttipaikat
1650 joule
Miljøparametere
Vaadittu käyttöjärjestelmä
Flytkontroll, full dupleks-funksjon, Auto-negotiation, fjernbeskyttelsesmansjett, VLAN støttet, wake on LAN (WOL), IPv4 og IPv6 Large Send Offload og Checksum Offload (LSO/TCO), Jumbo Frames-støtte
Indre dimensjoner
Leveys
2 (installert) / 3 (maks.)
Syvyys
Full dupleks-funksjon, fjernstyrt vekking
Strømforsyning
Huolto ja tuki
Opp til 597 filer / 3 foldere
Programvare / Systemkrav
Vähimmäiskäyttölämpötila
Intel 810
Enimmäiskäyttölämpötila
Intel Pentium
Toimintakosteus
45 watt
Produktet er kendt under følgende varenumre i vores system
EAN:
0065030840040
SKU:
PEXUSB3S11
Hvorfor oplever jeg at den umiddelbart samme vare findes på forskellige varenumre?
Producenterne udgiver ofte den samme vare med forskellige varenumre, typisk handler det udelukkende om forskellige versioner af emballagen. Eksempelvis kan emballagen være målrettet forskellige lande.
Vi forsøger bedst muligt at samle varerne, men det kan opleves at den samme vare figurerer på forskellige varenumre i vores system.