EUR 0,00
(toimituskulut: 0,00)
Ansmannin akkutesteri Comfort Check 1900-0110
Tuotenumero: [21730306] | Valmistaja: ANSMANN-ENERGY | Mallinum: 1900-0110 | EAN: 4013674204731
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
15,90
ilman ALV 12,67
Kokonaishinta sis. toimitus
22,92
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Test device for many battery and rechargeable battery types
The compact and user-friendly tester checks the energy content of the most common primary batteries and rechargeable batteries within a very short time. This makes it easy to see whether your rechargeable battery still has sufficient power or should be replaced.
LC display
With decimal display of the battery voltage in volts and additional bar display with 22 segments
Simple operation
The voltage of the battery type to be tested is set using the slide switch on the side: 1.2 V NiMH battery/1.5 V battery/3 V lithium battery/3.6 V Li-ion battery
- Pull out the battery compartment on the side
- Insert battery with correct polarity.
- Close the battery compartment.
- Display appears
A 9 V block can be tested directly on the contacts. The position of the slide switch is not relevant for this. The tester itself does not require its own battery for power supply.
The compact and user-friendly tester checks the energy content of the most common primary batteries and rechargeable batteries within a very short time. This makes it easy to see whether your rechargeable battery still has sufficient power or should be replaced.
LC display
With decimal display of the battery voltage in volts and additional bar display with 22 segments
Simple operation
The voltage of the battery type to be tested is set using the slide switch on the side: 1.2 V NiMH battery/1.5 V battery/3 V lithium battery/3.6 V Li-ion battery
- Pull out the battery compartment on the side
- Insert battery with correct polarity.
- Close the battery compartment.
- Display appears
A 9 V block can be tested directly on the contacts. The position of the slide switch is not relevant for this. The tester itself does not require its own battery for power supply.