The GETI Emergency Power Supply (EPS) is a device that provides an AC power source in the event of a power outage. You can use the emergency power supply system as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more.
In normal mode, the connected device is powered directly from the mains, and in the event of a power outage, the emergency power supply system automatically switches to inverter mode. The connected device is then powered by the connected battery.
If power is not restored, the emergency power system may shut down when the voltage of the connected battery drops to approximately 10.2 V ± 0.3 V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor. Warning: Installation of the unit must always be performed by a person with the appropriate professional qualifications! The battery terminals must be adequately protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuits.
Product Description: - Inverter, UPS, AVR, and charger all in one unit. - Easy-to-read color display. - High efficiency thanks to the toroidal transformer design. - High charging current. - Protection against overload, short circuit, overcharge, and reverse polarity.
Technical Specifications: - Backup battery type: AGM, GEL. - Backup battery voltage: 12V DC. - Rated capacity: 800VA. - Rated power: 500W. - Transformer: toroidal. - Input voltage: 230 V AC - 50 Hz. - Output voltage: 220 V AC ± 3% – 50 Hz / pure sine wave. - Charging current: 10 A / 15 A / 20 A (selectable). - Charging voltage: 13.6 V ± 0.3 V. - Low battery voltage limit: 10.9 V ± 0.3 V. - Low battery voltage disconnect protection: 10.2 V ± 0.3 V. - Response time: < 4 ms. - Cooling: Yes. - Operating temperature: 0 ~ 40°C. - Relative humidity: 10% ~ 90%. - Storage temperature: -15° to 45°C. - Battery cable length: 2 x 75 cm, M8. - Dimensions: 210 x 253 x 102 mm. - Weight: 4.5 kg. The Geti gel-type lead-acid battery is particularly suitable for solar and wind power systems and RVs, but also as a replacement for batteries in UPS backup systems, backup power sources, security system applications, EPS, telecommunications, mobile warning and signaling devices, etc. It is a maintenance-free, hermetically sealed battery, which allows for installation in any orientation. Technical specifications: - Manufacturing technology: VRLA (valve-regulated lead-acid) - Type: GEL - Voltage: 12 V - Capacity: 120 Ah - Dimensions: 407 x 177 x 222 mm. - Total height (with terminals): 225 mm. - Weight: approx. 35 kg. - Internal resistance (fully charged battery): 4 m?. - Self-discharge rate < 3%, 25°C. Package contents: 1 GETI GEP501 backup power supply + 120 Ah lead-acid battery. Carton weight: 39 kg
Löydämme tuotteen järjestelmästämme helposti seuraavalla tuotenumerolla
SKU:
GET-04230655
Miksi samalla tuotteella on monta eri tuotesivua tai tuotenumeroa?
Valmistajat usein julkaisevat saman tuotteen monella eri tuotenumerolla. Usein eroa on vain pakkauksessa. Eri tuotepakkaus saattaa olla suunniteltu eri valtioille.
Yritämme parhaamme mukaan laittaa samat tuotteet saman tuotenumeron alle, mutta joskus sama tuote on eri tuotenumeroilla sivullamme.