EUR 0,00
(toimituskulut: 0,00)
Fischer 59062, Ruuvi, Sinkkipinnoitettu teräs, Puu, Sinkki, Torx, TX25
Tuotenumero: [4633122] | Valmistaja: Fischer | Mallinum: 59062 | EAN: 4006209590621
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
70,54
ilman ALV 56,21
Kokonaishinta sis. toimitus
70,54
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Advantages
- The coordinated threads with the same pitch allow for the pin-point positioning and alignment of the fixture, which can even be mounted at an angle to the screw. This allows for an exact and flexible fixing.
- During the installation, the fixture is not pulled onto the substrate, instead it is brought directly to the desired distance and position. This allows for a simple and exact installation.
- When combined with SX Plus 8 and UX 8 plugs, it can be used in almost all wall materials, guaranteeing a secure fixing.
The fischer spacing screw ASL is a special screw made of zinc-plated steel with two coordinated threads at the same pitch, allowing for precise and time-saving stand-off installation. The special screw is used in through-type installation. When driving in the screw, the external thread cuts into the pre-drilled fixture, and fixes it. If the screw is driven in at an angle of 15 - 30° then higher shear loads can be carried. The fischer spacing screw ASL is ideal for fixing timber window and door frames, cladding, and sub-constructions without plugs in wood and wood materials.
Functionality
- The ASL is suitable for push-through installation.
- Pre-drill the fixture at the desired angle in order to achieve the correct positioning and alignment.
- When screwing in the screw, the external thread cuts into the pre-drilled fixture, and fixes it into the stipulated position.
- The angled position of the screws (15° - 30°) allows high shear loads to be supported.
- The coordinated threads with the same pitch allow for the pin-point positioning and alignment of the fixture, which can even be mounted at an angle to the screw. This allows for an exact and flexible fixing.
- During the installation, the fixture is not pulled onto the substrate, instead it is brought directly to the desired distance and position. This allows for a simple and exact installation.
- When combined with SX Plus 8 and UX 8 plugs, it can be used in almost all wall materials, guaranteeing a secure fixing.
The fischer spacing screw ASL is a special screw made of zinc-plated steel with two coordinated threads at the same pitch, allowing for precise and time-saving stand-off installation. The special screw is used in through-type installation. When driving in the screw, the external thread cuts into the pre-drilled fixture, and fixes it. If the screw is driven in at an angle of 15 - 30° then higher shear loads can be carried. The fischer spacing screw ASL is ideal for fixing timber window and door frames, cladding, and sub-constructions without plugs in wood and wood materials.
Functionality
- The ASL is suitable for push-through installation.
- Pre-drill the fixture at the desired angle in order to achieve the correct positioning and alignment.
- When screwing in the screw, the external thread cuts into the pre-drilled fixture, and fixes it into the stipulated position.
- The angled position of the screws (15° - 30°) allows high shear loads to be supported.