EUR 0,00
(toimituskulut: 0,00)
Joy-iT RB-CASEP4+03, Kotelo, Raspberry Pi, Musta, Muovi, 67 mm, 97 mm
Tuotenumero: [7752962] | Valmistaja: Joy-IT | Mallinum: RB-CaseP4+03 | EAN: 4250236819532
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
14,27
ilman ALV 11,37
Kokonaishinta sis. toimitus
21,29
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The robust plastic housing made of acrylic convinces by modern design and technical innovation.
The only distinguishing feature is the new locking mechanism of this housing. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and the Raspberry PI 4B at any time. Whether connecting a new jumper cable to the PINs, checking the status LEDs or other work directly on the Pi board: If the Raspberry Pi is mounted inside a housing, screws on the housing often have to be laboriously removed to maintain the single-board computer. Thanks to the strong magnets in the upper, middle and lower part of this housing, screw-less mounting is possible. So the cover can be removed at any time.
The two integrated fans and the included heat sinks provide a constant cooling of the Raspberry PI 4B.
Enjoy the full performance of the Raspberry PI 4B and easy access to the board!
The only distinguishing feature is the new locking mechanism of this housing. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and the Raspberry PI 4B at any time. Whether connecting a new jumper cable to the PINs, checking the status LEDs or other work directly on the Pi board: If the Raspberry Pi is mounted inside a housing, screws on the housing often have to be laboriously removed to maintain the single-board computer. Thanks to the strong magnets in the upper, middle and lower part of this housing, screw-less mounting is possible. So the cover can be removed at any time.
The two integrated fans and the included heat sinks provide a constant cooling of the Raspberry PI 4B.
Enjoy the full performance of the Raspberry PI 4B and easy access to the board!