EUR 0,00
(toimituskulut: 0,00)
Inline Embedded Wspornik 2 x USB 3.0 (33390C)
Tuotenumero: [793453] | Valmistaja: Inline | Mallinum: 33390C | EAN: 4043718188031
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
33,43
ilman ALV 26,64
Kokonaishinta sis. toimitus
40,45
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Easily route internal USB 3.2 ports to the rear
Two rear USB-A ports:Use an internal USB 3.2 Gen.1 connection as external ports.
Quick expansion without modifications:Insert into a free slot and connect to the 19-pin motherboard header.
Clean cable management:Cable length approx. 0.5 m for flexible routing inside the case.
Reliable connectivity:Direct connection to the motherboard for stable USB connections.
The slot bracket routes the internal USB 3.2 Gen.1 motherboard connector to the outside and provides two USB-A ports on the rear of the case. This allows you to use additional USB ports when front ports are occupied or more ports are needed. Setup is straightforward: Insert the slot bracket and connect the 19-pin motherboard header.
In professional IT environments and in on-site deployments, it complements existing systems with minimal effort and improves the accessibility of USB ports. It also simplifies temporary device connections in service deployments and in companies and public institutions, providing a tidy access point at the rear of the case.
External connection:2x USB-A ports
Internal connection:19-pin motherboard header
Standard:USB 3.2 Gen.1
Length:approx. 0.5 m
Two rear USB-A ports:Use an internal USB 3.2 Gen.1 connection as external ports.
Quick expansion without modifications:Insert into a free slot and connect to the 19-pin motherboard header.
Clean cable management:Cable length approx. 0.5 m for flexible routing inside the case.
Reliable connectivity:Direct connection to the motherboard for stable USB connections.
The slot bracket routes the internal USB 3.2 Gen.1 motherboard connector to the outside and provides two USB-A ports on the rear of the case. This allows you to use additional USB ports when front ports are occupied or more ports are needed. Setup is straightforward: Insert the slot bracket and connect the 19-pin motherboard header.
In professional IT environments and in on-site deployments, it complements existing systems with minimal effort and improves the accessibility of USB ports. It also simplifies temporary device connections in service deployments and in companies and public institutions, providing a tidy access point at the rear of the case.
External connection:2x USB-A ports
Internal connection:19-pin motherboard header
Standard:USB 3.2 Gen.1
Length:approx. 0.5 m