EUR 0,00
(toimituskulut: 0,00)
Alphacool Aurora Vertical GPU Bracket + PCI-E 3.0 x16 Riser Ribbon -kaapeli, 21 cm Alphacool Aurora Vertical GPU Bracket + PCI-E 3.0 x16 Riser Ribbon -kaapeli, 21 cm
Tuotenumero: [8146503] | Valmistaja: Alphacool | Mallinum: 11951 | EAN: 4250197119511
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
110,40
ilman ALV 87,97
Kokonaishinta sis. toimitus
110,40
Lisää listaan
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Send på mail
With the Alphacool Aurora Vertical GPU mount including riser cable, a graphics card can be installed vertically in common PC cases. The mount features 11 individually controllable 5V aRGB LEDs that create unique lighting effects.
Mounting
For this, six of the existing slot covers on the back of the case must be removed. The GPU mount including the already mounted graphics card is positioned in the area of the removed slot covers and screwed into the case using the included support clamp and the M3x6 screws.
Brilliant lighting
In the lower part of the bracket 11 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble looking illumination. The Digital aRGB LED illumination is connected via a JST 3-pin connector. To control the digital RGB lighting, the included adapter must be plugged into the 3-pin female connector and connected to a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360, not included) or a digital RGB capable motherboard. The remaining 3-pin male connector can be used to connect additional digital RGB LEDs.
Mounting
For this, six of the existing slot covers on the back of the case must be removed. The GPU mount including the already mounted graphics card is positioned in the area of the removed slot covers and screwed into the case using the included support clamp and the M3x6 screws.
Brilliant lighting
In the lower part of the bracket 11 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble looking illumination. The Digital aRGB LED illumination is connected via a JST 3-pin connector. To control the digital RGB lighting, the included adapter must be plugged into the 3-pin female connector and connected to a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360, not included) or a digital RGB capable motherboard. The remaining 3-pin male connector can be used to connect additional digital RGB LEDs.