EUR 0,00
(toimituskulut: 0,00)
InLine 33328Z, Monivärinen, 13 g, 85 mm, 130 mm, 20 mm, 200 cm ³
Tuotenumero: [943254] | Valmistaja: Inline | Mallinum: 33328Z | EAN: 4043718082384
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
4,67
ilman ALV 3,72
Kokonaishinta sis. toimitus
11,69
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Control case fans with a switch
Quick on/off switching:Manually control case fans with a switch.
Simple noise control:Temporarily deactivate fans at low load.
Clean in-case installation:Fits approx. 20 x 14 mm mounting opening.
Speed information remains available:3-pin connector with tach signal enables monitoring.
Flexible cable routing:Approx. 2 x 25 cm cable for convenient placement.
With this switch, you can switch case fans with a 3-pin connector on and off as needed. The tach signal is passed through, so you can continue to read the speed when the fan is active. Mounting is space-saving in a suitable opening. The cables provide flexibility for placement.
This facilitates test setups, quiet operating phases, and thermal testing in professional IT environments, in on-site installations as well as in existing infrastructures of companies and public institutions.
Connector:3-pin, with tach signal
Hole size:approx. 20 x 14 mm
Cable length:approx. 2 x 25 cm
Quick on/off switching:Manually control case fans with a switch.
Simple noise control:Temporarily deactivate fans at low load.
Clean in-case installation:Fits approx. 20 x 14 mm mounting opening.
Speed information remains available:3-pin connector with tach signal enables monitoring.
Flexible cable routing:Approx. 2 x 25 cm cable for convenient placement.
With this switch, you can switch case fans with a 3-pin connector on and off as needed. The tach signal is passed through, so you can continue to read the speed when the fan is active. Mounting is space-saving in a suitable opening. The cables provide flexibility for placement.
This facilitates test setups, quiet operating phases, and thermal testing in professional IT environments, in on-site installations as well as in existing infrastructures of companies and public institutions.
Connector:3-pin, with tach signal
Hole size:approx. 20 x 14 mm
Cable length:approx. 2 x 25 cm